MORE PHOTOS

PARAPETS AND ATYPICAL ACCESSORIES

Under-window parapets are produced made to measure depending upon the dimensions provided by the customer.

We offer parapets with bent sides, where accurate measurement of the parapet width is necessary and parapet sheets with plastic edges, where the length of the parapet can easily be adjusted by a simple cut and by affixing a plastic edge, the cut which is not necessarily ideal can be concealed.

In accordance with requirements and requests, we can also produce atypical plumbing accessories on the basis of submitted documentation, up to a length of 4m and up a nominal thickness of used material of 0.8mm.

PLUMBING ACCESSORIES

For our roof systems, we supply complete integrated range of roofing accessories. We are able to complete the majority of roofs with standard accessories. They are produced in the same colour as the roof covering.
Standardised plumbing accessories:
Current innovations - Gutter from trapeze sheet T05
Ridge bend
Gutter edging
Leeward cornice
Side edging
Overlapping coverings
Under-window parapets
Snow traps

GUTTERING OF TRAPEZE SHEETS

Unique innovations on the market. A gutter system made from trapeze sheet profile T05. Such profiled guttering gives better drainage and direction of water wherever needed, mainly during heavy rain. Additionally, this profile increases stability, which in practice means that a full framework under the guttering system is not necessary. This type of guttering can be used for metal sheet as well as for other types of coverings. It is made from unrolled widths of 500mm. It is necessary to place a universal self-adhesive cleat strip on both sides of the guttering, which will seal the area between the guttering and coverings, protecting against dirt, snow, water, etc.

RIDGE BENDS

With škridplech and gapa roof coverings, we supply ridge bends. The ridge is made of steel, continuously thermally zinc coated sheeting with plastic surface finishing matching the covering. The ridge has an unrolled width up to 416mm. Thanks to this type of ridge, there is no problem with overlapping the ventilation strip of the ridge as well as possible unevenness which was created during cutting, e.g. for hipped roofs.

GUTTERING EDGING

As standard, we offer two types of gutter edging - simple and complicated. It is ideal for fitting both edgings. On the picture, there are ideal placements of gutter edging. It is necessary to fit insurance hydro-insulation on simple edgings. Air necessary for ventilation of roof coatings is drawn through the area between the edgings and the roof covering is placed on the complicated edging.

LEEWARD CORNICE

As standard, we supply two types of leeward cornice - “on the covering” and “under the covering”. When using edging on the covering, the edging is fitted before assembly of the covering and when using edging under the covering, the edging is fitted after assembly of the roof covering.

SIDE EDGING

We produce side edging depending on the method of use for side edgings under the covering and on the covering. Its use is mainly on places of contact of the roof and vertical building construction.


OVERLAPPING OF VARIOUS TYPES OF COVERINGS

Overlapping of various types of coverings is used for reconstruction of roofs where the entire roof covering is not replaced and it is necessary to connect the original covering with the new one.

RAINWATER DRAIN SYSTEM
The rainwater drain system supplied by us is a high quality rainwater drain system with excellent multiple anti corrosion protection characteristics provided by the high -quality raw materials from a Swedish supplier.
The production base is steel sheet with a zinc layer of a min.275g/m2 and with the NOVA surface treatment of 50 microns on both sides.The presented system quarantees a long lifetime at a minimum of expense fr maintenance.Rainwatre drain systems are supplied in four colours:red-brown,brown,black and white.Drain trough size is 150mm with production lengths of 2 and 4m.The diameter of drain pipes is 100mm and production lengths are 1 and 3m.This system is expectional due to its easy assembly without soldering.

EXTERNAL METAL AND ALUMINUM WINDOW BOARDS

Console window boards are produced in high-class technology line in desired lenghts and widths,bespoke as necessary customer with short delivery date.

External window boards-aluminum(varnished)
-Are convex of aluminum metal,with polyester,which warrant long life warranty,resistance,color stability.Aluminum window boards are produced in thickness 1,0mm and are derived in two hue:brown and white.
-Tasteful visage,elegant conversion and long lifetime put them at predetermine for use mainly under the windows of villas,representative builds,but also of residential and paneled houses.

External window boards-steel(varnished)
-Are convex window boards of steel zinc dipping metal,treated steel with polyester 25 them safeguards resistance compared with corrosion.Window boards are produced in thickness 0,6mm abd are delivery in primer hues:brown and white,as a in others color conversions given the choice company Timeinvest,then are available at request.
-mainly low price and alike tasteful and elegance conversion as with aluminum window boards,put them at designate for under windows industrial objects,but it also residential and villas houses.
Accessories and attachment window boards
-To ending window boards we offer plastic stop sides
-To attachment we suggest low-expansion construction foam or bulding neaoprene glue.
-To seal joint is needed use neutral plumber silicon